Submit
  • Plastics

Bayblend® T88 GF-10

Rubber modified (PC+SAN) blend; 10% glass fibre reinforced; Vicat/B 120 temperature = 134 °C; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 4800 MPa;; good heat resistance

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • PC+ABS blend

Material

Plastics
Impact resistant, UV stable, Heat resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 240 - 270
Barrel Temperatures - Middle - °C 235 - 245
Barrel Temperatures - Nozzle - °C 265 - 275
Barrel Temperatures - Rear - °C 230 - 240
Dry Air Drying Temperature - °C 95 - 110
Dry Air Drying Time - h 4 - 4
Hold Pressure (% of injection pressure) - % 50 - 75
Melt Temperatures - °C 260 - 280
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 70 - 90
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt Temperature - °C 270
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Burning behavior UL 94 UL 94 0.85 mm Class HB
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.4
Coefficient of linear thermal expansion, transverse ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.67
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 133
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 121
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 134
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 132 - 132
Property Name Standard Test condition Unit Value
Izod impact strength ISO 180-U -30 °C kJ/m² 35
Izod impact strength ISO 180-U 23 °C kJ/m² 35
Izod notched impact strength ISO 180-A 23 °C kJ/m² 8.0
Izod notched impact strength ISO 180-A -30 °C kJ/m² 6
Strain at break ISO 527-1,-2 5 mm/min % 3.7
Stress at break ISO 527-1,-2 5 mm/min MPa 95 - 95
Tensile modulus ISO 527-1,-2 1 mm/min MPa 4800 - 4800
Yield strain ISO 527-1,-2 5 mm/min % 3.2
Yield stress ISO 527-1,-2 5 mm/min MPa 100
Property Name Standard Test condition Unit Value
Melt viscosity b.o. ISO 11443-A 1000 s^-1^; 260 °C Pa*s 205
Melt volume-flow rate ISO 1133 260 °C; 5 kg cm³/10 min 16
Molding shrinkage, normal b.o. ISO 2577 150x105x3 mm; 260 °C / MT 80 °C % 0.35 - 0.55
Molding shrinkage, parallel b.o. ISO 2577 150x105x3 mm; 260 °C / MT 80 °C % 0.25 - 0.45
Property Name Standard Test condition Unit Value
Comparative tracking index CTI IEC 60112 Solution A Rating 200
Dissipation factor IEC 60250 1 MHz 10^-4^ 90
Dissipation factor IEC 60250 100 Hz 10^-4^ 25
Electrical strength IEC 60243-1 1 mm kV/mm 35
Relative permittivity IEC 60250 1 MHz 3.0
Relative permittivity IEC 60250 100 Hz 3.2
Surface resistivity IEC 60093 Ohm 1E16
Volume resistivity IEC 60093 Ohm*m 1E14
Property Name Standard Test condition Unit Value
Injection molding-Injection velocity ISO 294 mm/s 540
Injection molding-Melt temperature ISO 294 °C 260 - 260
Injection molding-Mold temperature ISO 294 °C 80 - 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1220 - 1220
Glass fiber content b.o. ISO 3451-1 Method A % 10
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.2
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.4

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download
Sekantenmodul-Dehnung Bayblend® T88 GF-10 (Multipoint Data Sheet)
Secant modulus - Strain Bayblend® T88 GF-10 (Multipoint Data Sheet)
Spannung-Dehnung Bayblend® T88 GF-10 (Multipoint Data Sheet)
Viskosität Schergeschwindigkeit Bayblend® T88 GF-10 (Multipoint Data Sheet)
Dynamic Shear Modulus – Temperature Bayblend® T88 GF-10 (Multipoint Data Sheet)
Dynamischer Schubmodul - Temperatur Bayblend® T88 GF-10 (Multipoint Data Sheet)
Viscosity Shear Rate Bayblend® T88 GF-10 (Multipoint Data Sheet)
Stress-Strain Bayblend® T88 GF-10 (Multipoint Data Sheet)

Do you want to know more about Bayblend® T88 GF-10?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

1 product to compare