Submit
  • Plastics

Bayblend® FR3030

(PC+ABS)-Blend; flame retardant; Vicat/B 120 temperature = 115°C; extrusion grade; good extrusion and vacuum-forming behaviour; UL recognition 94 V-0 at 1.5 mm; halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 1.0 mm

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • PC+ABS blend

Material

Plastics
Impact resistant, Flame retardant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Burning behavior UL 94 (1.5 mm) [UL recognition] UL 94 1.5 mm Class V-0
Burning behavior UL 94-5V [UL recognition] UL 94 2.0 mm Class 5VB
Burning behavior UL 94-5V [UL recognition] UL 94 3.0 mm Class 5VA
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.72
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.68
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 106
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 98
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 115
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 113
Property Name Standard Test condition Unit Value
Izod impact strength ISO 180/U 23 °C kJ/m² N
Izod notched impact strength ISO 180/A 23 °C kJ/m² 40
Izod notched impact strength ISO 180/A -30 °C kJ/m² 10
Strain at break b.o. ISO 527-1,-2 50 mm/min % > 50
Stress at break ISO 527-1,-2 50 mm/min MPa 53
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2650
Yield strain ISO 527-1,-2 50 mm/min % 5
Yield stress ISO 527-1,-2 50 mm/min MPa 69
Property Name Standard Test condition Unit Value
Melt viscosity b.o. ISO 11443-A 1000 s^-1^/ 260 °C Pa*s 410
Melt volume-flow rate ISO 1133 260 °C/ 5 kg cm³/10 min 11
Molding shrinkage, normal b.o. ISO 2577 150x105x3 mm/ 260 °C / MT 80 °C % 0.5 - 0.7
Molding shrinkage, parallel b.o. ISO 2577 150x105x3 mm/ 260 °C / MT 80 °C % 0.5 - 0.7
Property Name Standard Test condition Unit Value
Comparative tracking index CTI IEC 60112 Solution A Rating 350
Dissipation factor IEC 60250 1 MHz 10^-4^ 75
Dissipation factor IEC 60250 100 Hz 10^-4^ 37
Electrical strength IEC 60243-1 1 mm kV/mm 35
Relative permittivity IEC 60250 1 MHz 3.1
Relative permittivity IEC 60250 100 Hz 3.2
Surface resistivity IEC 60093 Ohm 1E17
Volume resistivity IEC 60093 Ohm*m 1E15
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 240
Injection molding - Melt temperature ISO 294 °C 260
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1190
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.2
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.5

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Stress-Strain Bayblend® FR3030 (Multipoint Data Sheet) Spannung-Dehnung Bayblend® FR3030 (Multipoint Data Sheet)
Viscosity Shear Rate Bayblend® FR3030 (Multipoint Data Sheet) Viskosität Schergeschwindigkeit Bayblend® FR3030 (Multipoint Data Sheet)
Secant modulus - Strain Bayblend® FR3030 (Multipoint Data Sheet) Sekantenmodul-Dehnung Bayblend® FR3030 (Multipoint Data Sheet)

Do you want to know more about Bayblend® FR3030?
Get in touch with our experts!

Contact form image Zoe

How would you describe yourself?

What type of material are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

Compare