Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. Information is available in several forms, e.g., in particular in the currently valid safety data sheets and product labels. For further information contact your Covestro representative.
Product description
Softcel VE-1100 polyether polyol is a unique polyol for the production of slabstock and molded viscoelastic foam.
Applications
Softcel VE-1100 polyether polyol is a unique polyol for the production of slabstock and molded viscoelastic foam. It provides expanded formulating and processing flexibility and is designed to offer enhanced reactivity and promote cure of high density viscoelastic foams. This allows for the production of a wide range of viscoelastic foam grades with consistent performance properties that can be tailored to end-use applications.Softcel VE-1100 is typically employed as the primary polyether polyol in TDI based formulations of most standard density and firmness grades of slabstock foams. Firm grades may require an addition of a high solids polymer such as Arcol® HS-200 polymer. Low level addition of a high hydroxyl foam modifier/extender is generally recommended to control foam recover rates. Most other standard chemical intermediates may be employed. Use of a lower functionality MDI such as Mondur® 3694 may be beneficial for processing very high density slabstock grades and is recommended for production of molded viscoelastic foam. As with any product, use of Softcel VE-1100 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
Typical Values
Property | Test Condition | Value | Unit | Standard |
---|---|---|---|---|
Specific gravity | at 20°C | 1,029 | ||
Viscosity | at 25°C | 240 | cSt | |
Flash point | PMCC | 212 | °C | |
Bulk density | at 20°C | 8,59 | lb/gal |
Storage
Softcel VE-1100 polyol is slightly hygroscopic and may absorb water. Containers should be kept tightly closed and protected from contamination with moisture and foreign materials, which can adversely affect product quality. This polyol can become quite viscous at low temperatures. For ease of handling, storage temperatures between 15°C (59°F) and 60°C (140°F) are recommended. The shelf life is twelve months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
Health and Safety Information
Disclaimer
General
The manner in which you use our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products to determine suitability for your processing and intended uses. Your analysis must at least include testing to determine suitability from a technical, health, safety, and environmental and regulatory standpoint. Such testing has not necessarily been done by Covestro, and Covestro has not obtained any approvals or licenses for a particular use or application of the product.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request.
All information and including technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed by you that you assume and hereby expressly release indemnify us and hold us harmless from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent.
Non Medical and non Food Contact
This product is not designated for the manufacture of a medical device or of intermediate products for medical devices (1). This product is also not designated for other specifically regulated applications (e.g. including cosmetics, plant protection, fertilisers, plant strengtheners, food processing, food contact and others). If the intended use of the product is for the manufacture of a medical device or of intermediate products for medical devices or for other specifically regulated applications Covestro must be contacted in advance to provide its agreement to sell such product for such purpose. Nonetheless, any determination as to whether a product is appropriate for use in a medical device or intermediate products for medical devices, for Food Contact products or cosmetic applications must be made solely by the purchaser of the product without relying upon any representations by Covestro.
1) Please see the Guidance on Use of Covestro Products in a Medical Application document.
Sample
Any samples provided by Covestro are for testing purposes only and not for commercial use.
Typical value
These values are typical values only. Unless explicitly agreed in written form, they do not constitute a binding material specification or warranted values
Contact
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .