Makrolon® FR6009
medium viscosity; UV stabilized; flame retardant; impact modified; improved chemical resistance compared to standard Makrolon grades; housing parts; Information technology; electrical/electronic
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Burning behavior UL 94 | UL 94 | 2.0 mm | Class | 5VB |
| Burning behavior UL 94 (1.5 mm) | UL 94 | Class | V0 | |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 124 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 110 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 132 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 131 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | -30 °C/ 3 mm | kJ/m² | 21C |
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | 23 °C/ 3 mm | kJ/m² | 78P |
| Flexural modulus | ISO 178 | 2 mm/min | MPa | 2320 |
| Flexural strength | ISO 178 | 2 mm/min | MPa | 89 |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 72P |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | -30 °C/ 3 mm | kJ/m² | 23C |
| Puncture energy | ISO 6603-2 | 23 °C | J | 48 |
| Puncture impact properties - maximum force | ISO 6603-2 | 23 °C | N | 4600 |
| Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | 130 |
| Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 61 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2200 |
| Yield strain | ISO 527-1,-2 | 50 mm/min | % | 5.6 |
| Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 59 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 11 |
| Molding shrinkage, parallel/normal | b.o. ISO 2577 | Value range based on general practical experience | % | 0.6 - 0.8 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Injection velocity | ISO 294 | mm/s | 200 | |
| Injection molding - Melt temperature | ISO 294 | °C | 300 | |
| Injection molding - Mold temperature | ISO 294 | °C | 80 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Density | ISO 1183-1 | kg/m³ | 1190 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
