Submit
  • Plastics

Makrolon® DQ5122

MVR (300 °C/1.2 kg) 34 cm³/10 min; light diffusion grade; low diffusion; low viscosity; UV stabilized; easy release

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Plastics
Optical quality, Transparent, UV stable

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 260 - 270
Barrel Temperatures - Middle - °C 250 - 260
Barrel Temperatures - Nozzle - °C 260 - 270
Barrel Temperatures - Rear - °C 230 - 240
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 250 - 300
Moisture Content max. (%) - % <= 0.02
Mold Temperatures - °C 80 - 120
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 270
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Burning behavior UL 94 [UL recognition] UL 94 0.75 mm Class V-2
Glow wire test (GWFI) IEC 60695-2-12 0.75 mm °C 850
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 850
Glow wire test (GWFI) IEC 60695-2-12 3.0 mm °C 930
Glow wire test (GWIT) IEC 60695-2-13 0.75 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 3.0 mm °C 850
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 135
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 120
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 140
Property Name Standard Test condition Unit Value
Charpy impact strength ISO 179/1eU -30 °C kJ/m² N
Charpy impact strength ISO 179/1eU 23 °C kJ/m² N
Charpy notched impact strength ISO 7391/b.o. ISO 179/1eA -30 °C/ 3 mm kJ/m² 12(C)
Charpy notched impact strength ISO 7391/b.o. ISO 179/1eA 23 °C/ 3 mm kJ/m² 12(C)
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 50
Puncture energy ISO 6603-2 23 °C J 44
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 5800
Puncture impact properties - maximum force ISO 6603-2 23 °C N 4900
Strain at break b.o. ISO 527-1,-2 50 mm/min % 120
Stress at break ISO 527-1,-2 50 mm/min MPa 60
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2300
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 65
Property Name Standard Test condition Unit Value
Half power angle Covestro Test 1 mm ° 10
Half power angle Covestro Test 2 mm ° 19
Half power angle Covestro Test 3 mm ° 25
Half power angle Covestro Test 4 mm ° 30
Haze ISO 14782 2 mm % 100
Haze ISO 14782 1 mm % 97
Luminous transmittance ISO 13468-2 1 mm % 87
Luminous transmittance ISO 13468-2 2 mm % 85
Luminous transmittance ISO 13468-2 3 mm % 81
Luminous transmittance ISO 13468-2 4 mm % 76
Property Name Standard Test condition Unit Value
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 34
Molding shrinkage, normal ISO 294-4 60x60x2 mm/ 500 bar % 0.65
Molding shrinkage, parallel ISO 294-4 60x60x2 mm/ 500 bar % 0.65
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 280
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1200
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.12
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.3

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download

Do you want to know more about Makrolon® DQ5122?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare