Covestro certifies that the product meets specifications for 6 months from the date of shipment, provided it is stored and handled in accordance with the conditions specified in the ‘Storage’ section. After this period, product performance is not assured; Customers are responsible for retesting material before use. Covestro assumes no liability for product performance after 6 months.
Product description
Impranil® HS 1062 is a solvent free polyol for the production of polyurethane products. Impranil® HS 1062 is suitable in transfer coating for the production of intermediate coatings (compact or foamed) and as an adhesive coating.
Applications
Impranil® HS 1062 is used in the following areas:
- Upholstery material for the automotive interior
- Upholstery material for upholstered furniture
- Technical textiles
Form supplied
Solvent free liquid with a non-volatile content of > 98%.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Hydroxyl number | 110 - 135 | mg KOH/g | M023 - ISO 4629-2 | |
| Dynamic viscosity | 23 °C | 3,300 - 5,700 | mPa·s | M058 - ISO 3219 |
| Water content | 0.1 - 0.4 | % | M018 - DIN 51777-1 |
Principal properties
- Very good hydrolysis resistance
- Very high buckling resistance even at low temperatures
- Very good light fastness
- Very good pot times
- Very low VOC values
- Odourless
Storage
- Storage in original Covestro container
- Recommended storage temperature: 10 - 35 °C
- Protect from frost, heat and foreign material.
General information: The product has a melting range between 10 and 30 °C. Thus, it slowly solidifies when stored at room temperature. We recommend short-term heating to 80 °C prior to use to fully liquify the product. Uncomplete melting can effect the properties of the coating. Some cloudiness may persist even after heating but has no detrimental effects on performance.
Storage time
Processing
Basic recipe:
Impranil® HS 1062 54.40 %
BYK L9565 0.91 %
Catalyst 1 0.03 % (zinc salt of a fatty acid)
Catalyst 2 0.06 % (bismuth / zinc carboxylate)
Imprafix IO 3330 44.60 %
Other additives such as dyes, flame retardants or foaming agents can be added without any problems after the blending of the Imprafix IO 3330.
Preparation of the paste:
Mix the components well in the given order with constant stirring. When preparing the paste, a temperature of 40°C should not be exceeded. The paste has a pot life of at least 3 hours. It is recommended to vent the coating paste before processing.
Film properties
Health and Safety Information
Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
