Form supplied
Milky white dispersion in water
Specification
Property | Test Condition | Value | Unit | Standard |
---|---|---|---|---|
Non-volatile content | (0.9-1.1g / 1h / 125°C, convection oven) | 50 ± 2 | % | DIN EN ISO 3251 |
Viscosity at 23 °C, spindle L3 / 30 rpm | < 1,500 | mPa*s | DIN EN ISO 2555 | |
pH value | at 20 °C, (supply form) | 5,5 - 7,5 | DIN ISO 976 |
Typical Values
Property | Test Condition | Value | Unit | Standard |
---|---|---|---|---|
Density | at 20 °C | approx. 1,0 | g/ml | DIN EN ISO 2811/3 |
Solubility / thinnability
Impranil® DLI can be thinned in any ratio with deionized water.
Compatibility
In general DLI shows a very good compatibility with additives, waterborne pigments, levelling and haptic agents which are commonly used for waterborne textile coating formulations.
Storage
Storage in original sealed Covestro container. Recommended storage temperature: 5 - 30 °C. Protect from frost, heat and foreign material. General information: The product cannot be used if it has been frozen.
Storage time
Covestro represents that, for a period of nine months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.The lapse of the nine months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the nine months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the nine months period.