Impranil® DL 1343
Anionic aliphatic polyether polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aliphatic polyether polyurethane dispersion.
Impranil® DL 1343 is suitable for the following applications:
Impranil® DL 1343 is suitable for the following applications:
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect fromfrost , heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
- Recommended storage temperature: 5 - 30 °C.
- Protect from
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23 °C | DIN EN ISO 2811/3 | g/cm3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content, (0,9 – 1,1 g/1 h / 125 °C) | DIN EN ISO 3251 | % | 39 - 42 |
| pH-value | DIN ISO 976 | 6.0 - 9.0 | |
| Viscosity at 23 °C | DIN EN ISO 2555 | mPa*s | < 1,000 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
