Impranil® DL 1068
Impranil® DL 1068 is an anionic aliphatic polyether-polyurethane dispersed in water
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Impranil® DL 1068 is an anionic aliphatic polyether-polyurethane dispersed in water
Storage Conditions
- Store in original, tightly sealed Covestro container.
- Recommended storage temperature: 41° - 86° F (5° - 30° C)
- Protect from frost, excessive heat and foreign material contamination.
General information: The product cannot be used if it has been frozen. The container must be closed tightly to prevent the evaporation of water which may result in the formation of a non-dispersable film. Briefly heating to 122° F (50° C) has no adverse effect on product properties.
- Recommended storage temperature: 41° - 86° F (5° - 30° C)
- Protect from frost, excessive heat and foreign material contamination.
General information: The product cannot be used if it has been frozen. The container must be closed tightly to prevent the evaporation of water which may result in the formation of a non-dispersable film. Briefly heating to 122° F (50° C) has no adverse effect on product properties.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Volume swelling (24h at room temp) - Water | % | < 10 | |
100% Modulus | psi | 224.8 | |
Tensile strength | psi | 3045.8 | |
Elongation at break | % | 1050 | |
Melting range (uncrosslinked) | °F (°C) | 392 - 410 (200 - 210) |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
pH value | 5.5 - 9.0 | ||
Density 23°C | g/cm^3 | approx. 1.1 | |
Non-volatile content 0.9 - 1.1g / 1h/125°C, convection oven | % | 48 - 52 | |
Viscosity @ 23°C | mPas | ≤ 1800 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com