Imprafix® HS-DW-01
Anionic aliphatic polyurethane dispersion filled with silica.Imprafix® HS-DW 01 is used as a dispersion agent for adhesion coats based on Impranil® HS 62.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aliphatic polyurethane dispersion filled with silica.
Imprafix® HS-DW 01 is used as a dispersion agent for adhesion coats based on Impranil® HS 62.
Imprafix® HS-DW 01 is used as a dispersion agent for adhesion coats based on Impranil® HS 62.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. The product cannot be used if it has been frozen.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information: The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. The product cannot be used if it has been frozen.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C* | DIN EN ISO 3219/A.3 | mPa*s | 900 - 1,300 |
| Non-volatile content (0.9-1.1g/1h/125°C,convection oven) | DIN EN ISO 3251 | % | 43,5 ± 1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
