- Coatings, paints & inks
Desmophen® 1300 BA
Polyester polyol.As the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester resin
Material
- Coatings, paints & inks
- Fast curing
General Characterization
Polyester polyol.
As the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
As the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: max. 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is slightly hygroscopic.
- Recommended storage temperature: max. 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is slightly hygroscopic.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN EN ISO 1523 | °C | approx. 30 |
| Equivalent weight | approx. 530 | ||
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1,06 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C | DIN EN ISO 3219/A.3 | mPa*s | 1,000 ± 200 |
| Iodine color value | DIN EN 1557 | ≤ 4 | |
| Acid value | DIN EN ISO 2114 | mg KOH/g | 9 ± 3 |
| Water content | DIN 51 777/1 | % | ≤ 0.1 |
| Hydroxyl content | DIN EN ISO 4629-2 | % | 3.2 ± 0.3 |
| Non-volatile content 2 g resin/2 ml toluene/ 1 h at 125 °C, convection oven | DIN EN ISO 3251 | 75 ± 1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
