- Thermoplastic Polyurethanes
Desmopan 9662DU
Extrusion- and injection molding grade; with special UV stabilizers; transparent up to 6 mm wall thickness; very good hydrolysis and microbial resistance; Application; Ski boot shells; Hoses, non-reinforced
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Chemical resistant, Scratch resistant, Wear resistant, Weather resistant, Tear resistant, Transparent, Cold-flexibility, Abrasion resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Extrusion - Melt temperature | - | °C | 205 - 235 | |
| Injection molding - Melt temperature | - | °C | 220 - 235 | |
| Injection molding - Mold temperature | - | °C | 40 - 60 | |
| Maximum drying temperature | - | °C | 110 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 2530 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 643 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 187 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Abrasion resistance | ISO 4649 method A | mm³ | 20 | |
| Compression set | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 43 |
| Compression set | DIN ISO 815-1 | 72 h; 23 °C | % | 59 |
| Compression set | DIN ISO 815-1, Method C | 24 h; 70 °C | % | 26 |
| Flexural modulus | ISO 178 | 2 mm/min | MPa | 185 |
| Rebound resilience | ISO 4662 | % | 31 | |
| shore hardness A | DIN ISO 7619-1 | 1s | 97 | |
| shore hardness D | DIN ISO 7619-1 | 1s | 62 | |
| Strain at break | DIN 53504 | 200 mm/min | % | 352 |
| Stress at 10 % strain | DIN 53504 | 200 mm/min | MPa | 12,3 |
| Stress at 100 % strain | DIN 53504 | 200 mm/min | MPa | 26,0 |
| Stress at 300 % strain | DIN 53504 | 200 mm/min | MPa | 40,1 |
| Stress at 50 % strain | DIN 53504 | 200 mm/min | MPa | 20,7 |
| Tear strength | ISO 34-1 | 500 mm/min | kN/m | 98 |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 52.7 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Density | ISO 1183-1 | kg/m³ | 1176 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
