- Coatings, paints & inks
Desmodur® VL R 10
Aromatic polyisocyanate based on diphenylmethane diisocyanate. In combination with suitable low-viscosity Desmophen® products to formulate spray coatings and sealing compounds.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Coatings, paints & inks
- Solvent-free, Hard
General Characterization
Aromatic polyisocyanate based on diphenylmethane diisocyanate.
In combination with suitable low-viscosity Desmophen® products to formulate spray coatings and sealing compounds.
In combination with suitable low-viscosity Desmophen® products to formulate spray coatings and sealing compounds.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at higher temperatures may result in an increase in viscosity and at lower temperatures in the formation of crystalline deposits.
Detailed information on safe handling, transport and storage of isocyanates is given in the guidelines of the ISOPA association.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at higher temperatures may result in an increase in viscosity and at lower temperatures in the formation of crystalline deposits.
Detailed information on safe handling, transport and storage of isocyanates is given in the guidelines of the ISOPA association.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20°C | DIN EN ISO 2811-3 | g/ml | approx. 1.24 |
| Equivalent weight | approx. 133 | ||
| Flash point | DIN EN ISO 2719 | °C | approx. 200 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acidity (HCI) | MDI-01-03 | mg/kg | ≤ 350 |
| NCO | MDI-01-01 | % | 31.5 ± 1.0 |
| Viscosity at 25 °C | MDI-01-02 | mPa*s | 120 ± 20 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
