Desmodur® L 75 (A)
Aromatic polyisocyanate based on tolulene diisocyanate. In combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane adhesives.Desmodur L 75 (A) is the unstabilization version of Desmodur L 75 (C) and we recommend L 75 (A) in application of adhesives.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Aromatic polyisocyanate based on toluene diisocyanate.
In combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane adhesives.
We recommend L 75 (A) in application of adhesives.
In combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane adhesives.
We recommend L 75 (A) in application of adhesives.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN 51755 | °C | approx. 5 |
| Equivalent weight | approx. 315 | ||
| Density at 20 °C | DIN EN ISO 2811-3 | g/ml | approx. 1.17 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Monomer content | M106-ISO 10283 | % | < 0.5 |
| NCO content | M105-ISO 11909 | % | 13.3 ± 0.4 |
| Non-volatile content | M020-ISO 3251 | % | 75.0 ± 2.0 |
| Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | 1,600 ± 400 |
| Color (Iodine) | M017-EN 1557 | ≤ 2 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
