Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. Information is available in several forms, e.g., in particular in the currently valid safety data sheets and product labels. For further information contact your Covestro representative.
Product description
Aromatic polyisocyanate based on toluene diisocyanate.Hardener component for fast drying, two-component polyurethane coatings.
Applications
The two-component polyurethane systems formulated with Desmodur® IL 1451 BA are characterized by their very rapid initial drying and early sandability, making them ideal for the industrial coating of wood and furniture. An NCO/OH ratio of approx. 0.5 - 0.7 is recommended as a function of the reactivity and hardness of the polyol. With an NCO/OH ratio of 1:1, the Desmodur® IL 1451 BA must be combined with Desmodur® L/ultra L. In this case, the optimal ratio of the Desmodur L/ultra L / IL 1451 is a function of polyol hardness and the required drying time. The low viscosity and high reactivity of the Desmodur® IL 1451 BA enables the formulation of clear and colored coatings with high solids contents. These can be applied quickly and only a few coats are required.
Form supplied
approx. 51 % in butyl acetate
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| NCO content | 7,4 ± 0,2 | % | M105-ISO 11909 | |
| Non-volatile content | (0.2 g / 60 min / 120 °C) | 51,0 ± 2,0 | % | M020-ISO 3251 |
| Viscosity | (23 °C) | 250 ± 75 | mPa*s | M014-ISO 3219/A.3 |
| Color value | (Iod) | ≤ 1,0 | M017-EN 1557 | |
| Monomeric content | < 0,50 | % | M106-ISO 10283 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Equivalent weight | approx. 570 | |||
| Flash point | approx. 26 | °C | DIN EN ISO 1523 | |
| Density at 20 °C | approx. 1,07 | g/ml | DIN EN ISO 2811-3 |
Solubility / thinnability
Generally speaking, Desmodur® IL 1451 BA is well suited to thinning with esters such as ethyl acetate, butyl acetate, 1-methoxyproplyacetate-2 and aromatic hydrocarbons such as toluene, xylene, Solvesso® 100 and Shellsol® A. The solutions formed must be tested for their storage stability. In particular, prolonged storage of a solution with low binder content may result in turbidity and sedimentation. The product cannot be reduced with mineral spirit. Alcohols react with Desmodur® IL 1451 BA and therefore may not be used. Only PU grade solvents (< 0.05 % water, free of other reactive impurities) may be used.
Compatibility
Desmodur® IL 1451 BA is compatible with Desmophen® A 450, many polyester-based Desmophen® grades and with alkyd resin, including combinations with nitrocellulose. In the critical combinations, Desmodur® IL 1451 BA exhibits better compatibility than the standard products based on TDI isocyanurates. Desmodur® IL 1451 BA can be combined with Desmodur® L/ultra L and also with Desmodur® HL and Desmodur® N/ultra N. The compatibility of Desmodur® IL 1451 BA with the other formulation components must be tested in advance.
Storage
- Storage in original sealed Covestro container. - Recommended storage temperature: 0 - 30 °C. - Protect from moisture, heat and foreign material. General information: The product is sensitive to moisture. Storage at higher temperatures may result in increased viscosity.
Storage time
Covestro represents that, for a period of nine months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.The lapse of the nine months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the nine months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the nine months period.
Health and Safety Information
Disclaimer
General
The manner in which you use our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products to determine suitability for your processing and intended uses. Your analysis must at least include testing to determine suitability from a technical, health, safety, and environmental and regulatory standpoint. Such testing has not necessarily been done by Covestro, and Covestro has not obtained any approvals or licenses for a particular use or application of the product.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request.
All information and including technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed by you that you assume and hereby expressly release indemnify us and hold us harmless from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent.
Non Medical and non Food Contact
This product is not designated for the manufacture of a medical device or of intermediate products for medical devices (1). This product is also not designated for other specifically regulated applications (e.g. including cosmetics, plant protection, fertilisers, plant strengtheners, food processing, food contact and others). If the intended use of the product is for the manufacture of a medical device or of intermediate products for medical devices or for other specifically regulated applications Covestro must be contacted in advance to provide its agreement to sell such product for such purpose. Nonetheless, any determination as to whether a product is appropriate for use in a medical device or intermediate products for medical devices, for Food Contact products or cosmetic applications must be made solely by the purchaser of the product without relying upon any representations by Covestro.
1) Please see the Guidance on Use of Covestro Products in a Medical Application document.
Sample
Any samples provided by Covestro are for testing purposes only and not for commercial use.
Typical value
These values are typical values only. Unless explicitly agreed in written form, they do not constitute a binding material specification or warranted values
Contact
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
