- Coatings, paints & inks
Desmodur® E 2190 X
Aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI).
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- MDI
- Prepolymer
- Polyisocyanate
- Isocyanate
- Reactive system
Material
- Coatings, paints & inks
- Solventborne, Hard
General Characterization
Aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI).
As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture.
As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: room temperature (approx. 23 °C)
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at high temperatures will cause an increase in viscosity.
- Recommended storage temperature: room temperature (approx. 23 °C)
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at high temperatures will cause an increase in viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN EN 22 719 | °C | approx. 25 |
| Density at 20 °C | DIN 53 217 | g/ml | approx. 1.11 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | DIN EN ISO 11 909 | 14.3 ± 0.5 | |
| Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | 1,100 ± 400 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
