- Coatings, paints & inks
Bayhydur® ultra 2759
Hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI). Hardener for waterborne two-component polyurethane systems.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- IPDI
- Hydrophilic polyisocyanate
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
Material
- Coatings, paints & inks
- Easy mixing, Ultra-low monomer, Waterborne, Weather resistant
General Characterization
Hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI).
Hardener for waterborne two-component polyurethane systems.
Hardener for waterborne two-component polyurethane systems.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20 °C | DIN 51 757 | g/cm3 | approx. 1.09 |
| Flash point | DIN EN ISO 13736 | °C | approx. 50 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 11 ± 0.5 |
| Monomeric IPDI | M106-ISO 10283 | % | < 0.1 |
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 6,000 ± 1,000 |
| Color value (Hazen) | M017-EN 1557 | ≤ 100 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
