Bayblend® FR3015 CTI
(PC-I)-Blend; impact modified; flame retardant; Vicat/B 120 temperature = 120 °C; CTI = 600 V; developed for high voltage application such as electric vehicles and battery packaging; for available colors, please contact us
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Barrel Temperatures - Front | - | °C | 230 - 240 | |
| Barrel Temperatures - Middle | - | °C | 225 - 235 | |
| Barrel Temperatures - Nozzle | - | °C | 255 - 265 | |
| Barrel Temperatures - Rear | - | °C | 220 - 230 | |
| Dry Air Drying Temperature | - | °C | 80 | |
| Dry Air Drying Time | - | h | 4 | |
| Hold Pressure (% of injection pressure) | - | % | 50 - 75 | |
| Melt temperatures | - | °C | 240 - 270 | |
| Moisture Content max. (%) | - | % | <=0.02 | |
| Mold Temperatures | - | °C | 60 - 90 | |
| Peripheral Screw Speed | - | m/s | 0.05 - 0.2 | |
| Plastic Back Pressure (specific) | - | bar | 50 - 150 | |
| Shot-to-Cylinder Size | - | % | 30 - 70 | |
| Standard Melt temperature | - | °C | 260 | |
| Vent Depth | - | mm | 0.025 - 0.075 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Burning behavior UL 94 (1.5 mm) [UL recognition] | UL 94 | Class | V-0 | |
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.78 |
| Coefficient of linear thermal expansion, parallel | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.76 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 1.5 mm | °C | 960 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 3.0 mm | °C | 960 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 1.5 mm | °C | 775 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 3.0 mm | °C | 775 |
| Resistance to heat (ball pressure test) | IEC 60695-10-2 | °C | 110 | |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 114 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 101 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 120 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 118 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Izod impact strength | ISO 180/U | 23 °C | kJ/m² | N |
| Izod notched impact strength | ISO 180/A | 23 °C | kJ/m² | 45 |
| Izod notched impact strength | ISO 180/A | -30 °C | kJ/m² | 19 |
| Nominal strain at break | ISO 527-1,-2 | 5 mm/min | % | >50 |
| Strain at break | ISO 527-1,-2 | 5 mm/min | % | 118 |
| Stress at break | ISO 527-1,-2 | 5 mm/min | MPa | 62 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2370 |
| Yield strain | ISO 527-1,-2 | 5 mm/min | % | 5 |
| Yield stress | ISO 527-1,-2 | 5 mm/min | MPa | 62 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Melt viscosity | b.o. ISO 11443-A | 1000 s^-1^/ 260 °C | Pa*s | 305 |
| Melt volume-flow rate | ISO 1133 | 260 °C/ 5 kg | cm³/10 min | 23 |
| Molding shrinkage, normal | ISO 294-4 | 60x60x2 mm³/ 260 °C / MT 80 °C/ 500 bar | % | 0.5 - 0.6 |
| Molding shrinkage, parallel | ISO 294-4 | 60x60x2 mm³/ 260 °C / MT 80 °C/ 500 bar | % | 0.5 - 0.6 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Comparative tracking index CTI | IEC 60112 | Solution A | Rating | 600 |
| Electrical strength | IEC 60243-1 | 1 mm | kV/mm | 36 |
| Surface resistivity | IEC 62631-3-2 | Ohm | 5E+18 | |
| Volume resistivity | IEC 62631-3-1 | Ohm*m | 4E+16 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Melt temperature | ISO 294 | °C | 260 | |
| Injection molding - Mold temperature | ISO 294 | °C | 80 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Density | ISO 1183-1 | kg/m³ | 1180 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
