Covestro certifies that the product meets specifications for {{storageTimeWarrantyInMonths}} from the date of shipment, provided it is stored and handled in accordance with the conditions specified in the ‘Storage’ section. After this period, product performance is not assured; Customers are responsible for retesting material before use. Covestro assumes no liability for product performance after {{storageTimeWarrantyInMonths}}.
Product description
Aqueous colloidal dispersion of a 2-chlorobutadiene polymer with a high rate of crystallisation.Dispercoll® C 84 is suitable for the formulation of aqueous adhesives for use in the footwear, construction, furniture, mattress and automotive industries.
Form supplied
Aqueous poly-2-chlorobutadiene-1,3 dispersion
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile content | 54.5 - 55.5 | % | M077 - DIN 53563 | |
| Non-volatile content | 54.5 - 55.5 | % | ||
| Non-volatile content | 54.5 - 55.5 | % | ||
| Non-volatile content | 54.5 - 55.5 | % | ||
| Dynamic viscosity | 40 - 160 | mPa·s | ||
| pH-value | 11.5 - 13.5 | |||
| pH-value | 11.5 - 13.5 | |||
| pH-value | 11.5 - 13.5 |
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile content | 54.5 - 55.5 | % | M077 - DIN 53563 | |
| Dynamic viscosity | 40 - 160 | mPa·s |
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile matter | (2 g / 105 °C / 3 h) | 55 ± 0,5 | % | DIN EN ISO 3251 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Dynamic viscosity | LV / Sp2 / 60 rpm / 25°C | 100 | mPa*s | DIN EN ISO 2555 |
| pH | 13 | DIN ISO 976 | ||
| Crystallization | relative classification acc. to Shore A hardness | high | ||
| Gel content | low | Bayer method |
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Apparent viscosityby the Brookfield Test method | (LV / Sp2 / 60 rpm / 25°C) | approx. 100 | mPa*s | DIN EN ISO 2555 |
| pH | approx. 13 | DIN ISO 976 | ||
| Density | approx. 1,12 | g/cm3 | DIN 53 757 | |
| Minimum film-forming temperature | approx. 5 | °C | DIN 53 787 | |
| Crystallization | (relative classification acc. to Shore A hardness) | high | ||
| Gel content | low | Bayer method |
Storage
- Storage in original sealed Covestro container. - Recommended storage temperature: 10 - 25 °C. - Protect from frost, heat and foreign material. General information: This product is sensitive to frost, and must be protected from cold. Frozen product is irreversibly damaged. Containers must be kept sealed as otherwise the evaporation of water will result in the formation of a non-redispersible film. Due to the process, the product can tend toward subsequent creaming. This manifests in the form of a very thin, brown layer which after some time becomes visible on the surface of the product. Prior homogenization of the product using a suitable stirrer is recommended each time product is removed from the container.
Storage time
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.The lapse of the six months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the six months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the six months period.
Processing
The pH of Dispercoll® C can decrease during storage. To ensure a reproducible application process, adjusting the pH to a consistent value using 10 % potassium hydroxide solution is recommended.
Health and Safety Information
Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
