- Thermoplastic Polyurethanes
Desmopan 9370A GMP
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; free from plasticizers; high moisture vapor transmission rate; This product is manufactured under Good Manufacturing Practice (GMP defined in Regulation (EC) No. 2023/2006) and is therefore limited suitability for use with food contact. Please refer our separate certificate at http://www.tpu.covestro.com/en/Library/Certificates/Food-Contact.aspx.; Application; breathable films; Seals, membranes; Films; hard - soft systems; Sports shoe soles
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Soft touch, Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant, Food-contact-compliant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 射出成形-溶融温度 | - | °C | 190 - 210 | |
| 射出成形-金型温度 | - | °C | 20 - 40 | |
| 押出-溶融温度 | - | °C | 175 - 210 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 125 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 11 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 9 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Compression set | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 51 |
| Compression set | DIN ISO 815-1 | 72 h; 23 °C | % | 22 |
| Compression set | DIN ISO 815-1, Method C | 24 h; 70 °C | % | 35 |
| Rebound resilience | ISO 4662 | % | 63 | |
| Tear strength | ISO 34-1 | 500 mm/min | kN/m | 39 |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 25.7 |
| ショア硬度A | DIN ISO 7619-1 | 1s | 70 | |
| 引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 738 |
| 強度 （10%伸び時） | DIN 53504 | 200 mm/min | MPa | 1,0 |
| 強度 （100%伸び時） | DIN 53504 | 200 mm/min | MPa | 3,5 |
| 強度 （300%伸び時） | DIN 53504 | 200 mm/min | MPa | 6,7 |
| 耐摩耗性 | ISO 4649 method A | mm³ | 69 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1060 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
