- Adhesives
- Coatings, paints & inks
Bayhydur® ultra 304
Hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). As the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- PIC
- Hydrophilic polyisocyanate
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Adhesives
- Moisture resistant, Ultra-low monomer, Waterborne, Heat activated
- Coatings, paints & inks
- Easy mixing, Ultra-low monomer, Waterborne, Weather resistant, High functional
General Characterization
Hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).
As the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA’s guidelines Title 21 CFR: Section 175.105 “Adhesives”.
As the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA’s guidelines Title 21 CFR: Section 175.105 “Adhesives”.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity. Due to the raw materials, the product may show visible turbidity caused by the cold. This turbidity occurs at approx. + 5 °C and is reversible when heated to room temperature. The product properties are not affected.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity. Due to the raw materials, the product may show visible turbidity caused by the cold. This turbidity occurs at approx. + 5 °C and is reversible when heated to room temperature. The product properties are not affected.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN EN 22719 | °C | 226 |
| Density | DIN 51757 | g/ml | approx. 1.16 |
| Equivalent weight | approx. 230 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 18.2 ± 0.5 |
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 4,000 ± 1,500 |
| Color value (Hazen) | M017-EN 1557 | ≤ 60 | |
| Monomeric HDI | M106-ISO 10283 | < 0.10 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
