- Adhesives
- Coatings, paints & inks
Bayhydur® ultra 3100
Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). As the hardener component for high-quality aqueous two-component polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- PIC
- Hydrophilic polyisocyanate
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Adhesives
- Moisture resistant, Ultra-low monomer, Waterborne, Heat activated
- Coatings, paints & inks
- Easy mixing, Ultra-low monomer, Waterborne, Weather resistant
General Characterization
Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).
As the hardener component for high-quality aqueous two-component polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA's guidlines "Title 21 CFR" : Section 175.105 "Adhesives".
As the hardener component for high-quality aqueous two-component polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems.
With respect to its composition, the product corresponds to the following sections of the U.S. FDA's guidlines "Title 21 CFR" : Section 175.105 "Adhesives".
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 25 °C | M014-ISO 3219/A.3 | mPa*s | approx. 2,500 |
| Density at 20 °C | DIN 53217 | g/ml | approx. 1.16 |
| Flash point | DIN EN 22719 | °C | > 250 |
| Equivalent weight | approx. 241 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Color value (Hazen) | M017-EN 1557 | ≤ 60 | |
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 2,800 ± 800 |
| Monomeric HDI | M106-ISO 10283 | % | < 0.10 |
| NCO content | M105-ISO 11909 | % | 17.4 ± 0.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
