- Coatings, paints & inks
Desmophen® CQ NH 1723 LF
Biobased, aminofunctional co-reactant for polyisocyanates with low content of diethylfumarate. For the formulation of high-solids, two-component polyurethane topcoats and coating materials. Form supplied Yellowish to yellow,
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Resin
- NH-reactive resin
- Polyaspartic
Material
- Coatings, paints & inks
- Fast curing, Easy mixing, Hard, Flexible, Elastic
General Characterization
Biobased, aminofunctional co-reactant for polyisocyanates with low content of diethylfumarate.
For the formulation of high-solids, two-component polyurethane topcoats and coating materials.
For the formulation of high-solids, two-component polyurethane topcoats and coating materials.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
^1 carbon not originating from primary fossil sources expresses as percentage of the total carbon | |||
Alternative carbon share ^1 bio-based, seggregated | ASTM D 6866-16 Methode B (AMS) | % | approx. 28 |
Equivalent weight | approx. 290 | ||
Alternative raw material share ^2 bio-based, seggregated | calculated | wt.-% | approx. 29 |
^2 elements not originating from primary fossil sources expressed as percentage of the total mass | |||
Water content | DIN 51 777-1 | % | ≤ 0.15 |
Flash point | DIN EN ISO 2719 | °C | approx. 194 |
Density at 20 °C | DIN 51 757 | g/ml | approx. 1.06 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
diethylfumarate value | M192-AFAM 2008-0007001 | % | < 0.10 |
Amine value | M129-AFAM 2011-06054 | mg KOH/g | 185,0 - 205,0 |
Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | approx. 120 |
Viscosity (25 °C) | M014-ISO 3219/A.3 | mPa*s | ≥ 80 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com