i
市场转换
选择会影响你得到的结果。
关于
材料类型
- Polyaspartics
- 树脂
- NH-反应型树脂
材料
- 涂料、油漆和油墨
- 易混合, 柔韧, 弹性, 坚硬, 快速固化
一般特征
Biobased, aminofunctional co-reactant for polyisocyanates with low content of diethylfumarate.
For the formulation of high-solids, two-component polyurethane topcoats and coating materials.
For the formulation of high-solids, two-component polyurethane topcoats and coating materials.
储存条件
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Alternative raw material share ^2 bio-based, seggregated | calculated | wt.-% | approx. 29 |
| Density at 20 °C | DIN 51 757 | g/ml | approx. 1.06 |
| Equivalent weight | approx. 290 | ||
| ^2 elements not originating from primary fossil sources expressed as percentage of the total mass | |||
| Alternative carbon share ^1 bio-based, seggregated | ASTM D 6866-16 Methode B (AMS) | % | approx. 28 |
| Flash point | DIN EN ISO 2719 | °C | approx. 194 |
| ^1 carbon not originating from primary fossil sources expresses as percentage of the total carbon | |||
| Water content | DIN 51 777-1 | % | ≤ 0.15 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Viscosity (25 °C) | M014-ISO 3219/A.3 | mPa*s | ≥ 80 |
| diethylfumarate value | M192-AFAM 2008-0007001 | % | < 0.10 |
| Amine value | M129-AFAM 2011-06054 | mg KOH/g | 185,0 - 205,0 |
| Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | approx. 120 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
