Desmophen® 10WF15 - for flexible moulded foams
A reactive polyether triol used for the production of flexible polyurethane cold-curing molded HR foam for automotive seating. Hydroxyl Number ca. 35 mg KOH/g
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyol
Material
No data available
General Characterization
Desmophen® 10WF15 is a reactive polyether triol used for the production of flexible polyurethane cold-curing molded HR foam for automotive seating.
Storage Conditions
Recommended storage temperature (°C) 10 - 35
Product must be stored in sealed, moisture-tight containers.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Product must be stored in sealed, moisture-tight containers.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Sampling
Moisture access should be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density 25 °C | DIN 51757 | g/cm³ | 1.02 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acidity | PET-01-01 | mg KOH/g | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 33 - 37 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 790 - 930 |
| Water content | PET-19-01 | % by wt. | ≤ 0.05 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 790 - 930 |
| Acidity | PET-01-01 | mg KOH/g | ≤ 0.10 |
| Water content | PET-19-01 | % by wt. | ≤ 0.05 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 33 - 37 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
