i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 多元醇
材料
无可用数据
一般特征
Desmophen® 10WF15 is a reactive polyether triol used for the production of flexible polyurethane cold-curing molded HR foam for automotive seating.
储存条件
Recommended storage temperature (°C) 10 - 35
Product must be stored in sealed, moisture-tight containers.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Product must be stored in sealed, moisture-tight containers.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
样品
Moisture access should be prevented when taking product samples.
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Density 25 °C | DIN 51757 | g/cm³ | 1.02 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Acidity | PET-01-01 | mg KOH/g | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 33 - 37 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 790 - 930 |
| Water content | PET-19-01 | % by wt. | ≤ 0.05 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 790 - 930 |
| Acidity | PET-01-01 | mg KOH/g | ≤ 0.10 |
| Water content | PET-19-01 | % by wt. | ≤ 0.05 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 33 - 37 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
