- Thermoplastic Polyurethanes
Desmopan 385 S
injection molding grade; hydrolysis-stabilised; high mechanical strength; Application; Technical parts; Screenpacks
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Soft touch, Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Maximum drying temperature | - | °C | 80 | |
| 注塑-模具溫度 | - | °C | 20 - 40 | |
| 注塑-熔體溫度 | - | °C | 210 - 230 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 拉伸儲能模量 | ISO 6721-1,-4 | -20 °C | MPa | 186 |
| 拉伸儲能模量 | ISO 6721-1,-4 | 20 °C | MPa | 51 |
| 拉伸儲能模量 | ISO 6721-1,-4 | 60 °C | MPa | 37 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 100% 應變時的應力 | b.o. ISO 527-1,-3 | 200 mm/min | MPa | 6.0 |
| 300% 應變時的應力 | b.o. ISO 527-1,-3 | 200 mm/min | MPa | 17 |
| 回彈力 | ISO 4662 | % | 42 | |
| 壓縮率 | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 36 |
| 壓縮率 | DIN ISO 815-1 | 72 h; 23 °C | % | 30 |
| 壓縮率 | DIN ISO 815-1, Method C | 24 h; 70 °C | % | 25 |
| 撕裂强度 | ISO 34-1 | 500 mm/min | kN/m | 70 |
| 斷裂應變 | DIN 53504 | 200 mm/min | % | 630 |
| 最終拉伸强度 | DIN 53504 | 200 mm/min | MPa | 53 |
| 耐磨性 | ISO 4649 method A | mm³ | 30 | |
| 邵氏硬度 A | DIN ISO 7619-1 | 1s | 85 | |
| 邵氏硬度 D | DIN ISO 7619-1 | 1s | 32 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
