• Thermoplastic Polyurethane

Desmopan 3059D

injection molding grade; with release agent; excellent abrasion resistance; good wear resistance; Application; Heel patches; Rollers; Boot shells; Injection molded engineering parts

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Thermoplastic Polyurethane
Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Maximum drying temperature - °C 110
射出成形-溶融温度 - °C 220 - 240
射出成形-金型温度 - °C 20 - 40
Property Name Standard Test condition Unit Value
Tensile storage modulus ISO 6721-1,-4 -20 °C MPa 2435
Tensile storage modulus ISO 6721-1,-4 20 °C MPa 586
Tensile storage modulus ISO 6721-1,-4 60 °C MPa 181
Property Name Standard Test condition Unit Value
Compression set DIN ISO 815-1, Method A 24 h; 70 °C % 42
Compression set DIN ISO 815-1 72 h; 23 °C % 24
Compression set DIN ISO 815-1, Method C 24 h; 70 °C % 24
Rebound resilience ISO 4662 % 35
Tear strength ISO 34-1 500 mm/min kN/m 160
Ultimate tensile strength b.o. ISO 527-1,-3 200 mm/min MPa 50
ショア硬度A DIN ISO 7619-1 1s 97
ショア硬度D DIN ISO 7619-1 1s 59
引張り破断伸び率 b.o. ISO 527-1,-3 200 mm/min % 400
強度 (100%伸び時) b.o. ISO 527-1,-3 200 mm/min MPa 21
強度 (300%伸び時) b.o. ISO 527-1,-3 200 mm/min MPa 42
曲げ弾性率 ISO 178 2 mm/min MPa 180
耐摩耗性 ISO 4649 method A mm³ 18
Property Name Standard Test condition Unit Value
密度 ISO 1183-1 kg/m³ 1230

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Compare