Desmodur® VP.PU 3228 - for flexible foams
a TDI - MDI blend, is a mixture of different aromatic diisocyanates and isomers and homologues of higher functionality used for the production of the flexible polyurethane cold-curing molded foam for furniture industry.NCO Content ca. 43 %
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
A mixture of toluene diisocyanates (TDI) and methylene diphenyl isocyanates (MDI) for the production of cold-cure polyurethane foam used to manufacture cushions for upholstery in seating applications.
Storage Conditions
- Storage in original sealed container.
- Recommended storage temperature: 20 - 40°C.
- Protect from moisture, heat and foreign material.
General information:
The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes at temperatures below 18°C. However, careful melting at up to 50°C will reliquify the product without any detrimental effect on its quality. The contact surface temperature may not exceed 80°C. The reliquified product must be homogenized as crystallisation causes a shift in the isomer ratio between the crystalline and the still liquid phases.
Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.
Storage time:
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of the six months period does not necessarily mean that the ... text to long! (max 2000 characters)
- Recommended storage temperature: 20 - 40°C.
- Protect from moisture, heat and foreign material.
General information:
The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes at temperatures below 18°C. However, careful melting at up to 50°C will reliquify the product without any detrimental effect on its quality. The contact surface temperature may not exceed 80°C. The reliquified product must be homogenized as crystallisation causes a shift in the isomer ratio between the crystalline and the still liquid phases.
Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.
Storage time:
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of the six months period does not necessarily mean that the ... text to long! (max 2000 characters)
Sampling
The access of moisture in any form must be prevented.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Appearance | DIN ISO 6271 | brownish black liquid | |
| Density 20 °C | DIN 51757 | g/cm³ | approx. 1.22 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | TDI-01-21 | % by wt. | 42.5 - 43.8 |
| Viscosity 25 °C | TDI-01-23 | mPa*s | 5.0 - 10.0 |
| Hydrolysable chlorine | TDI-01-03 | mg/kg | ≤ 1000 |
| Hydrolysable chlorine | TDI-01-03 | mg/kg | ≤ 1000 |
| Viscosity 25 °C | TDI-01-23 | mPa*s | 5.0 - 10.0 |
| NCO content | TDI-01-21 | % by wt. | 42.5 - 43.8 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
