i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
A mixture of toluene diisocyanates (TDI) and methylene diphenyl isocyanates (MDI) for the production of cold-cure polyurethane foam used to manufacture cushions for upholstery in seating applications.
Lagerungsbedingungen
- Storage in original sealed container.
- Recommended storage temperature: 20 - 40°C.
- Protect from moisture, heat and foreign material.
General information:
The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes at temperatures below 18°C. However, careful melting at up to 50°C will reliquify the product without any detrimental effect on its quality. The contact surface temperature may not exceed 80°C. The reliquified product must be homogenized as crystallisation causes a shift in the isomer ratio between the crystalline and the still liquid phases.
Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.
Storage time:
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of the six months period does not necessarily mean that the ... text to long! (max 2000 characters)
- Recommended storage temperature: 20 - 40°C.
- Protect from moisture, heat and foreign material.
General information:
The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes at temperatures below 18°C. However, careful melting at up to 50°C will reliquify the product without any detrimental effect on its quality. The contact surface temperature may not exceed 80°C. The reliquified product must be homogenized as crystallisation causes a shift in the isomer ratio between the crystalline and the still liquid phases.
Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.
Storage time:
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of the six months period does not necessarily mean that the ... text to long! (max 2000 characters)
Probenahme
The access of moisture in any form must be prevented.
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Density 20 °C | DIN 51757 | g/cm³ | approx. 1.22 |
Appearance | DIN ISO 6271 | brownish black liquid |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Hydrolysable chlorine | TDI-01-03 | mg/kg | ≤ 1000 |
NCO content | TDI-01-21 | % by wt. | 42.5 - 43.8 |
Hydrolysable chlorine | TDI-01-03 | mg/kg | ≤ 1000 |
NCO content | TDI-01-21 | % by wt. | 42.5 - 43.8 |
Viscosity 25 °C | TDI-01-23 | mPa*s | 5.0 - 10.0 |
Viscosity 25 °C | TDI-01-23 | mPa*s | 5.0 - 10.0 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com