- Adhesives
Desmodur® ultra RN
Solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- PIC
- Crosslinkers
- Polyisocyanate
- Polyisocyanurate
- TDI
- Isocyanate
- Reactive system
Material
- Adhesives
- Moisture resistant, Ultra-low monomer, Contact adhesive, Solventborne, Heat activated
General Characterization
Solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate.
Desmodur® ultra RN is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials. The use of suitable adhesives yields bonds which undergo minimal discoloration on exposure to light.
Desmodur® ultra RN is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials. The use of suitable adhesives yields bonds which undergo minimal discoloration on exposure to light.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous in-crease in pressure in the containers. Exposure to air and/or light intensifies discoloration but this has no effect on the processing properties in general.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous in-crease in pressure in the containers. Exposure to air and/or light intensifies discoloration but this has no effect on the processing properties in general.
Sampling
No data available
Packaging Type
Metal container: 1 litre bottle containing 0.75 kg
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN 51 755 | °C | - 5 |
| Solvent | Ethyl acetate | ||
| Density at 20 °C | DIN 53 217/5 | g/cm3 | approx. 1.04 |
| Viscosity at 23 °C | DIN 53 015 | mPa*s | approx. 11 |
| Non-volatile content | DIN EN ISO 3251 | % | approx. 40 |
| Monomeric content | DIN EN ISO 10283 | % | < 0.10 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 7.2 ± 0.3 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
