- Adhesives
- Coatings, paints & inks
Desmodur® CQ ultra N 7200
Biobased aliphatic polyisocyanate (PDI-trimer). As the hardener component for lightfast polyurethane coating systems.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PDI
- PIC
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Adhesives
- Bio origin, Moisture resistant, Solventborne, Ultra-low monomer, Solvent-free
- Coatings, paints & inks
- Bio origin, Alternative raw material share, Solventborne, Solvent-free, Ultra-low monomer, Hard, Weather resistant
General Characterization
Biobased aliphatic polyisocyanate (PDI-trimer).
As the hardener component for lightfast polyurethane coating systems.
As the hardener component for lightfast polyurethane coating systems.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Equivalent weight | approx. 186 | ||
| ^2 elements not originating from primary fossil sources expressed as percentage of the total mass | |||
| Alternative raw material share ^2bio-based, seggregated | calculated | wt.-% | approx. 25 |
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.18 |
| ^1 carbon not originating from primary fossil sources expressed as percentage of the total carbon | |||
| Alternative carbon share ^1 bio-based, seggregated | ASTM D 6866-16 Methode B (AMS) | % | approx. 28 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Monomeric PDI | M106-ISO 10283 | % | < 0.1 |
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | approx. 3,200 |
| NCO content | M105-ISO 11909 | % | approx. 22.6 |
| Color value (Hazen) | M017-EN 1557 | < 60 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
