- Adhesives
Desmocoll® 500/2
Predominantly linear hydroxyl polyurethane. Desmocoll® 500/2 is a flexible polyurethane with an extremely high crystallization rate. It has outstanding adhesion on PVC substrates and particularly on rubber. Due to its excellent solubility, Desmocoll® 500/2 can used for adhesives, based on non inflammable solvents, e.g. Methylen chloride. The bonds have outstanding resistance to the most commonly used PVC plasticisers.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PU resin
Material
- Adhesives
- Heat activated, Solventborne
General Characterization
Predominantly linear hydroxyl polyurethane.
Desmocoll® 500/2 is a flexible polyurethane with an extremely high crystallization rate. It has outstanding adhesion on PVC substrates and particularly on rubber. Due to its excellent solubility, Desmocoll® 500/2 can used for adhesives, based on non inflammable solvents, e.g. Methylen chloride. The bonds have outstanding resistance to the most commonly used PVC plasticisers.
Desmocoll® 500/2 is a flexible polyurethane with an extremely high crystallization rate. It has outstanding adhesion on PVC substrates and particularly on rubber. Due to its excellent solubility, Desmocoll® 500/2 can used for adhesives, based on non inflammable solvents, e.g. Methylen chloride. The bonds have outstanding resistance to the most commonly used PVC plasticisers.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 10 - 25 °C.
- Protect from direct sunlight, moisture, heat and foreign material.
- Recommended storage temperature: 10 - 25 °C.
- Protect from direct sunlight, moisture, heat and foreign material.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Hot tack life | DIN EN 12961 | min | approx. 4 |
| Density | DIN EN ISO 2811 | g/ml | approx. 1.2 |
| Bondability of materials containing plasticizers | DIN EN 15307 | excellent | |
| Heat resistance | ASTM D 816 | °C | approx. 50 |
| Hydroxyl content | DIN 53 240 | % | < 0.1 |
| Crystallization | DIN 53 505 | min | approx. 5 |
| Minimum activation temperature | DIN EN 12961 | °C | approx. 50 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Solution viscosity, 15 % inbutanone-2 (MEK) at 23 °C, Haake | DIN EN ISO 3219/A.3 | mPa*s | 600 ± 200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
