Bayhydrol® UH 2880
Anionic, aliphatic polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic, aliphatic polyurethane dispersion.
It can be used alone or blended with polyacrylic emulsion or polyurethane dispersion for the formulation of waterproofing membrane coatings and elastomeric construction coatings.
It can be used alone or blended with polyacrylic emulsion or polyurethane dispersion for the formulation of waterproofing membrane coatings and elastomeric construction coatings.
Storage Conditions
-Storage in original sealed Covestro container.
-Recommended storage temperature: 5-30°C.
-Protect from fost, heat and foreign material.
Generally information: the product can not be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of non-redispersible film.
-Recommended storage temperature: 5-30°C.
-Protect from fost, heat and foreign material.
Generally information: the product can not be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of non-redispersible film.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23 °C | DIN 53217/3 | g/cm3 | 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH-value | DIN ISO 976 | 6 - 9 | |
| Non-volatile content (1g / 1h / 125 °C,Convection oven) | DIN EN ISO 3251 | % | 50 ± 1 |
| Viscosity at 23 °C | DIN EN 3219/A.3 | mPa*s | ≤ 2500 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
