Bayhydrol® 124
Anionic aliphatic polycarbonate polyurethane dispersion. Binder for ambient-cure or bake coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aliphatic polycarbonate polyurethane dispersion.
Binder for ambient-cure or bake coatings.
Binder for ambient-cure or bake coatings.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 40 °C.
- Protect from frost, heat and foreign material.
General information: Bayhydrol® 124 polyurethane dispersion must be stored in tightly closed containers to prevent evaporation of water and the introduction of contaminants that can adversely affect processability. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
- Recommended storage temperature: 5 - 40 °C.
- Protect from frost, heat and foreign material.
General information: Bayhydrol® 124 polyurethane dispersion must be stored in tightly closed containers to prevent evaporation of water and the introduction of contaminants that can adversely affect processability. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20 °C | DIN EN ISO 2811 | g/ml | 1.06 |
| Freeze-thaw stability | pass 5 cycles | ||
| Appearance | milky white to brown |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (1g / 20 min. / 125 °C) | Mettler Toledio Halogen Moisture Analyzer | % | 35 ± 2 |
| pH value | DIN ISO 976 | 7.0 - 9.0 | |
| Viscosity at 25 °C, Spindel 1, D = approx. 30 rpm | DIN EN ISO 2555 | mPa*s | 50 - 400 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
