Desmopan CQ80D RC99
Extrusion- and injection molding grade; high mechanical strength; good wear resistance
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
乾燥温度 | - | °C | 90 - 100 | |
射出成形-溶融温度 | - | °C | 230 - 250 | |
射出成形-金型温度 | - | °C | 45 - 55 | |
押出-溶融温度 | - | °C | 220 - 250 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
ビカット軟化温度 | ISO 306 | 10 N; 120 °C/h | °C | 113 |
ビカット軟化温度 | ISO 306 | 50 N; 50 °C/h | °C | 99 |
荷重たわみ温度 | ISO 75-1,-2 | 0.45 MPa | °C | 95 |
荷重たわみ温度 | ISO 75-1,-2 | 1.80 MPa | °C | 89 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Rebound resilience | ISO 4662 | % | 62 | |
Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 40 |
シャルピー衝撃強度 | ISO 179/1eU | -30 °C | kJ/m² | No break |
シャルピー衝撃強度 | ISO 179/1eU | 23 °C | kJ/m² | No break |
ショア硬度D | DIN ISO 7619-1 | 1s | 75 | |
ノッチ付き シャルピー衝撃強度 | ISO 179/1eA | -30 °C | kJ/m² | 3 |
ノッチ付き シャルピー衝撃強度 | ISO 179/1eA | 23 °C | kJ/m² | 6.1 |
引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 60 |
強度 (10%伸び時) | DIN 53504 | 200 mm/min | MPa | 45 |
強度 (50%伸び時) | DIN 53504 | 200 mm/min | MPa | 38 |
曲げ弾性率 | ISO 178 | 2 mm/min | MPa | 1400 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com