- Foams
- Films
- Coatings, paints & inks
Baymedix® FD103
Aqueous polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Non-reactive system
- Waterbased dispersion
- PU dispersion - high molecular
- PU dispersion
Material
- Films
- Transparent
- Coatings, paints & inks
- Solvent-free, Flexible
- Foams
- Flexible, Open-cell
General Characterization
Aqueous polyurethane dispersion.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information : The product is sensitive to frost. Freezing will damage product irreversibly. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. Brief heating to max. 50 °C has no adverse effect on product properties.
Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable .
- Recommended storage temperature: 5 - 30 °C.
- Protect from frost, heat and foreign material.
General information : The product is sensitive to frost. Freezing will damage product irreversibly. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. Brief heating to max. 50 °C has no adverse effect on product properties.
Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable .
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (1 g / 1 h / 125 °C) | DIN EN ISO 3251 | % | 57 - 62 |
| Viscosity at 23 °C(shear rate 40 s^-1) | M014-ISO 3219/A.3 | mPa*s | ≤ 2,000 |
| pH | DIN ISO 976 | 7 - 9 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
