- Plastics
Apec® 1745
MVR (330°C/2.16kg) 17 cm³/10 min; easy release; for superheated steam sterilization up to 143 °C; meets criteria of US Pharmacopeia (USP) Class VI; biocompatible according to many ISO 10993-1 test requirements; softening temperature (VST/B 120)=170 °C; Films for medical packaging; Contact lens holders; Medical vessels; Safety valve for respiration aids; Syringe tops
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polycarbonate
Material
- Plastics
- Medical, Heat resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| スクリュー回転数 | - | m/s | 0.05 - 0.2 | |
| バレル温度‐ノズル | - | °C | 320 - 330 | |
| バレル温度‐中部 | - | °C | 300 - 310 | |
| バレル温度‐前部 | - | °C | 310 - 320 | |
| バレル温度‐後部 | - | °C | 290 - 300 | |
| ベント深さ | - | mm | 0.025 - 0.075 | |
| 乾燥時間（除湿乾燥機） | - | h | 2 - 3 | |
| 乾燥温度（除湿乾燥機） | - | °C | 130 | |
| 保圧（最大射出圧比） | - | % | 50 - 75 | |
| 最大含水率 | - | % | <= 0.02 | |
| 最適射出量 (最大射出量比) | - | % | 30 - 70 | |
| 標準樹脂温度 | - | °C | 330 | |
| 樹脂温度 | - | °C | 320 - 340 | |
| 背圧 | - | bar | 50 - 150 | |
| 金型温度 | - | °C | 110 - 130 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.65 |
| グローワイヤーテスト(GWFI) | IEC 60695-2-12 | 2.0 mm | °C | 850 |
| ビカット軟化温度 | ISO 306 | 50 N; 120 °C/h | °C | 170 |
| 燃焼性UL94(1.5mm) [] | UL 94 | 1.5 mm | Class | HB |
| 線膨張係数、流動方向 | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.65 |
| 荷重たわみ温度 | ISO 75-1,-2 | 0.45 MPa | °C | 161 |
| 荷重たわみ温度 | ISO 75-1,-2 | 1.80 MPa | °C | 148 |
| 酸素指数 | ISO 4589-2 | Method A | % | 25 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| シャルピー衝撃強度 | ISO 179/1eU | -30 °C | kJ/m² | N |
| シャルピー衝撃強度 | ISO 179/1eU | 23 °C | kJ/m² | N |
| 圧球式硬度 | ISO 2039-1 | N/mm² | 120 | |
| 引張り弾性率 | ISO 527-1,-2 | 1 mm/min | MPa | 2400 |
| 引張り破断伸び率 | ISO 527-1,-2 | 50 mm/min | % | > 50 |
| 引張り降伏伸び率 | ISO 527-1,-2 | 50 mm/min | % | 6.8 |
| 引張り降伏応力 | ISO 527-1,-2 | 50 mm/min | MPa | 70 |
| 曲げ弾性率 | ISO 178 | 2 mm/min | MPa | 2400 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 光線透過率 （透明材） | ISO 13468-2 | 1 mm | % | 88 |
| 屈折率 | ISO 489 | Procedure A | 1.578 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| MFR | ISO 1133 | 330 °C/ 2.16 kg | g/10 min | 17 |
| MVR | ISO 1133 | 330 °C/ 2.16 kg | cm³/10 min | 17 |
| 成形収縮率、垂直方向 | ISO 294-4 | 60x60x2 mm³/ 500 bar | % | 0.85 |
| 成形収縮率、流動方向 | ISO 294-4 | 60x60x2 mm³/ 500 bar | % | 0.85 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 体積抵抗率 | IEC 62631-3-1 | Ohm*m | 1E15 | |
| 比誘電率 | IEC 60250 | 1 MHz | 2.9 | |
| 比誘電率 | IEC 60250 | 100 Hz | 3 | |
| 絶縁破壊強度 | IEC 60243-1 | 1 mm | kV/mm | 35 |
| 耐トラッキングﾞ性 CTI | IEC 60112 | Solution A | Rating | 250 |
| 耐トラッキングﾞ性 CTI M | IEC 60112 | Solution B | Rating | 125 |
| 表面抵抗率 | IEC 62631-3-2 | Ohm | 1E16 | |
| 誘電正接 | IEC 60250 | 1 MHz | 10^-4^ | 80 |
| 誘電正接 | IEC 60250 | 100 Hz | 10^-4^ | 10 |
| 電食性 | IEC 60426 | Rating | A1 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 射出成形-射出速度 | ISO 294 | mm/s | 200 | |
| 射出成形-溶融温度 | ISO 294 | °C | 330 | |
| 射出成形-金型温度 | ISO 294 | °C | 100 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 吸水率 （平衡) | ISO 62 | 23 °C; 50 % r. h. | % | 0.12 |
| 吸水率 （飽和) | ISO 62 | Water at 23 °C | % | 0.3 |
| 密度 | ISO 1183-1 | kg/m³ | 1170 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
-
Secant modulus - Strain Apec® 1745 (Multipoint Data Sheet) Sekantenmodul-Dehnung Apec® 1745 (Multipoint Data Sheet)
-
Dynamic Shear Modulus – Temperature Apec® 1745 (Multipoint Data Sheet) Dynamischer Schubmodul - Temperatur Apec® 1745 (Multipoint Data Sheet)
-
Viskosität Schergeschwindigkeit Apec® 1745 (Multipoint Data Sheet) Viscosity Shear Rate Apec® 1745 (Multipoint Data Sheet)
-
Spannung-Dehnung Apec® 1745 (Multipoint Data Sheet) Stress-Strain Apec® 1745 (Multipoint Data Sheet)
