- Adhesives
- Coatings, paints & inks
Pergut® S 130
Chlorinated rubber. Binder for, among other things, adhesives.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Non-reactive system
- Chlorinated rubber
Material
- Adhesives
- Solventborne, Contact adhesive
- Coatings, paints & inks
- Solventborne, Flexible, Elastic
General Characterization
Pergut S 130 is a chlorinated rubber.
It is suitable as a binder for, among other things, adhesives.
It is suitable as a binder for, among other things, adhesives.
Storage Conditions
Pergut S 130 should be stored in tightly sealed original containers and protected from direct sunlight, moisture, heat, and foreign materials. Recommended storage temperature is 10º-25ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Black speck value 18.5% in toluene | ≤ 2 | ||
| Water content | % by wt. | < 0.3 | |
| Turbidiity 18.5% in toluene | ≤ 2 | ||
| Ash content | % by wt. | approx. 0.3 | |
| Density | g/ml | approx. 1.5 | |
| Chlorine content | % by wt. | ≥ 64.5 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Tetrachloromethane content | % by wt. | ≤ 0.005 | |
| Viscosity at 23^oC,18.5% in toluene | mPa∙s | 120 - 180 | |
| Toluene content | % by wt. | ≤ 2.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
