Mondur® MLQ
mixture of 4,4'- and 2,4'- MDI; NCO: approx. 33.5 Wt. %; Viscosity: approx. 10 mPa·s @ 25°C
i
Market Switch
Selection will influence the results you get.
About
Product Types
- MMDI
Material
No data available
General Characterization
Mondur MLQ monomeric diphenylmethane diisocyanate (MDI) contains a high percentage of 2,4-isomer.
Storage Conditions
Mondur MLQ isocyanate must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react with water to form ureas and carbon dioxide gas, which may cause sealed containers to expand and rupture. Partially filled containers should be blanketed with dry nitrogen.
Storage temperatures should be maintained between 20° to 35°C (68° to 95°F). Under these conditions, Mondur MLQ isocyanate will remain clear for up to six months from date of manufacture. Within this range, lower storage temperatures will maximize the storage life of this product.
Mondur MLQ isocyanate must not be allowed to freeze. Exposure to temperatures less than 20°C (68°F), even for short periods of time, can result in the formation of solid material. Appropriate precautions must be taken during shipment and storage.
Prolonged storage of solid or partially solid Mondur MLQ isocyanate may result in the formation of MDI dimer in amounts that exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.
If solids form because of exposure of Mondur MLQ isocyanate to low temperatures, it may be possible to reliquify the product by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product.
Significant amounts of MDI dimer may form during the heating process. As a result, the remelted diisocyanate may be cloudy, and the processing behavior and/or properties of the final product may be affected.
The shelf life is six months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
Storage temperatures should be maintained between 20° to 35°C (68° to 95°F). Under these conditions, Mondur MLQ isocyanate will remain clear for up to six months from date of manufacture. Within this range, lower storage temperatures will maximize the storage life of this product.
Mondur MLQ isocyanate must not be allowed to freeze. Exposure to temperatures less than 20°C (68°F), even for short periods of time, can result in the formation of solid material. Appropriate precautions must be taken during shipment and storage.
Prolonged storage of solid or partially solid Mondur MLQ isocyanate may result in the formation of MDI dimer in amounts that exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable.
If solids form because of exposure of Mondur MLQ isocyanate to low temperatures, it may be possible to reliquify the product by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product.
Significant amounts of MDI dimer may form during the heating process. As a result, the remelted diisocyanate may be cloudy, and the processing behavior and/or properties of the final product may be affected.
The shelf life is six months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Freeze Temperature | °C | 15 - 20 | |
Appearance | Light yellow, clear liquid | ||
Flash point PMCC | °C | 198 | |
Specific gravity at 25°C | 1.19 | ||
NCO content | wt.-% | 33.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com