Makrolon® FR6020 RE

polycarbonate; medium viscosity; easy release; UV stabilized; flame retardant; chlorine- and bromine-free flame retardancy; non-reinforced; good hydrolysis resistance; impact modified; Information technology; electrical/electronic

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Burning behavior UL 94 UL 94 2.0 mm Class V-0
Burning behavior UL 94 (1.5 mm) UL 94 Class V-0
Burning behavior UL 94-5V UL 94 2.0 mm Class 5VB
Burning behavior UL 94-5V UL 94 3.0 mm Class 5VB
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.58
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.49
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 127
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 114
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 136
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 134
Property Name Standard Test condition Unit Value
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C kJ/m² 69
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -30 °C kJ/m² 33
Flexural modulus ISO 178 2 mm/min MPa 2430
Flexural strength ISO 178 2 mm/min MPa 90
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C kJ/m² 67
Izod notched impact strength ISO 21305/based on ISO 180/A -30 °C kJ/m² 26
Strain at break b.o. ISO 527-1,-2 50 mm/min % > 100
Stress at break ISO 527-1,-2 50 mm/min MPa 58
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2380
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 58
Property Name Standard Test condition Unit Value
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 9
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.6 - 0.8
Property Name Standard Test condition Unit Value
Injection molding - Melt temperature ISO 294 °C 280 - 300
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1200

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com

Related topics

Compare