- Plastics
Makrolon® LED2245
MVR (300 °C/1.2 kg) 34 cm³/10 min; light guides; optics and lenses; PC with highest transmission; low viscosity; easy release
About
Product Types
- Polycarbonate
Material
- Plastics
- Transparent, Optical quality
General Characterization
No data available
Hazard Information according to EU-CLP Regulation
Класове опасности / категории опасности
Съгласно регламент (ЕО) № 1272/2008 относно класифицирането, етикетирането и опаковането на вещества и смеси ('регламент CLP')
- Не е класифициран съгласно Наредба (EC) No. 1272/2008.
třídy nebezpečnosti / kategorie nebezpečnosti
Podle Nařízení (ES) č. 1272/2008 o klasifikaci, označování a balení látek a směsí („Nařízení CLP“)
- Žádná klasifikace v souladu se Směrnicí (EC) č. 1272/2008.
Fareklasser / farekategorier
Iht. forordning (EU) nr. 1272/2008 om klassificering, mærkning og emballering af stoffer og blandinger ('CLP-forordningen')
- Ingen klassificering i henhold til forordning (EF) nr. 1272/2008.
Gefahrenklassen / Gefahrenkategorien
Gemäß Verordnung (EG) Nr. 1272/2008 über die Einstufung, Kennzeichnung
- und Verpackung von Stoffen und Gemischen (die 'CLP-Verordnung')
- Keine Einstufung nach der Verordnung (EG) Nr. 1272/2008.
Τάξεις κινδύνων / Κατηγορίες κινδύνων
Σύμφωνα με τον κανονισμό αρ. 1272/2008 της ΕΚ για την ταξινόμηση, την
- επισήμανση και τη συσκευασία των ουσιών και μιγμάτων ('Κανονισμός CLP')
- Καμία ταξινόμηση σύμφωνα με το την Οδηγία (EΚ) Αρ. 1272/2008.
Hazard Classes / Hazard Categories
According to Regulation (EC) No 1272/2008 on classification, labelling
- and packaging of substances and mixtures (the 'CLP Regulation')
- No classification in accordance with the Regulation (EC) No. 1272/2008.
Clases de peligro / Categorías de peligro
Conforme al Reglamento (CE) n.º 1272/2008 sobre clasificación, etiquetado y envasado de sustancias y mezclas (Reglamento CLP)
- Sin clasificar conforme a la normativa (CE) Nº 1272/2008.
Ohuklassid / Ohukategooriad
Vastavalt määrusele (EÜ) nr 1907/2006, mis käsitleb ainete ja segude klassifitseerimist, märgistamist ja pakendamist („CLP-määrus”)
- Vastavalt direktiivile (EÜ) nr 1272/2008 klassifikatsioon puudub.
Vaarallisuusryhmät / Vaarallisuusluokat
Aineiden ja seosten luokitusta, merkintää ja pakkausta koskevan Euroopan
- parlamentin ja neuvoston asetuksen (EY) N:o 1272/2008
- ("CLP-asetus")mukaan
- Tuotetta ei luokitella vaaralliseksi aineeksi tai seokseksi EY-asetuksen N:o 1272/2008 mukaan.
Classes de danger / Catégories de danger
Selon le règlement (CE) n° 1272/2008 relatif à la classification,
- l'étiquetage et l'emballage de substances et mélanges (le « règlement
- CLP »)
- Pas de classement conformément à la directive n° 1272/2008 (CE).
Razredi opasnosti / kategorije opasnosti
U skladu s Uredbom (EZ) br. 1272/2008 o razvrstavanju, označavanju i pakiranju tvari i smjesa ("CLP uredba")
- Nema klasifikacije u skladu s Direktivom (EC) br. 1272/2008.
Veszélyességi osztályok / veszélyességi kategóriák
Az anyagok és keverékek osztályozásáról, címkézéséről és csomagolásáról
- szóló 1272/2008/EK rendelet (a továbbiakban: CLP-rendelet) szerint
- Nincs osztályozva (EK) a 1272/2008 számú rendelet szerint.
Classi di pericolo / Categorie di pericolo
Secondo regolamento (EC) n. 1272/2008 relativo alla classificazione,
- all'etichettatura e all'imballaggio delle sostanze e delle miscele
- (regolamento 'CLP')
- Nessuna classificazione in base al Regolamento CE n. 1272/2008.
Pavojingumo klasės / Pavojingumo kategorijos
Pagal reglamentą (EB) Nr. 1272/2008 dėl cheminių medžiagų ir mišinių klasifikavimo, ženklinimo ir pakavimo (KŽP reglamentas)
- Neklasifikuojama pagal (EB) direktyvą Nr. 1272/2008.
Bīstamības klases / bīstamības kategorijas
Saskaņā ar Regulu (EK) Nr. 1272/2008 par vielu un maisījumu klasificēšanu, marķēšanu un iepakošanu (CLP regulu)
- Klasifikācija saskaņā ar Direktīvu (EK) Nr. 1272/2008 nav noteikta.
Gevarenklassen / Gevarencategorieën
Overeenkomstig verordening (EG) nr. 1272/2008 betreffende
- classificering, etikettering en verpakking van stoffen en mengsels (de
- "CLP-verordening")
- Geen indeling volgens Verordening (EG) nr. 1272/2008.
Fareklasser / farekategorier
Iht. regulering (EC) nr 1272/2008 om klassifisering, merking og pakking av substanser og blandinger ('CLP regulering')
- Ingen klassifisering i henhold til forordning (EF) nr. 1272/2008.
Klasy zagrożenia / Kategorie zagrożenia
Zgodnie z rozporządzeniem (WE) nr 1272/2008 w sprawie klasyfikacji,
- oznakowania i pakowania substancji i mieszanin („Rozporządzenie CLP”)
- Brak klasyfikacji zgodnie z Dyrektywą (WE) nr 1272/2008.
Classes de Risco / Categorias de Risco
De acordo com a regulamentação (EC) No. 1272/2008 sobre a classificação,
- rotulação e o embalamento de substâncias e misturas (a "regulamentação
- CLP")
- Não existe qualquer classificação em conformidade com o Regulamento (CE) n.º 1272/2008.
Clase de risc / categorii de risc
Conform Regulamentului CE 1272/2008 privind clasificarea, etichetarea și
- ambalarea substanțelor și a amestecurilor („Regulamentul CLP”)
- Nicio clasificare în conformitate cu Directiva (CE) Nr. 1272/2008.
класс/категория опасности
Согласно Регламенту (ЕС) № 1272/2008 о классификации, маркировке и упаковке химических веществ и смесей («Регламент CLP»)
- Не классифицируется в соответствии с Директивой (EC) No. 1272/2008.
Klase opasnosti / kategorije opasnosti
U skladu sa Uredbom (EZ) br. 1272/2008 o klasifikaciji, obeležavanju i pakovanju supstanci i smeša ('CLP uredba')
- Bez klasifikacije u skladu sa Direktivom (EK) br. 1272/2008.
Triedy nebezpečenstva / kategórie nebezpečenstva
V súlade s nariadením (ES) č. 1272/2008 o klasifikácii, označovaní a balení látok a zmesí (nariadenie CLP)
- Žiadne zaradenie podľa nariadenia č. 1272/2008/ES.
Razredi nevarnosti / kategorije nevarnosti
V skladu z Uredbo (ES) št. 1272/2008 o razvrščanju, označevanju in pakiranju snovi ter zmesi ("Uredba CLP")
- Ni razvrstitve v skladu z Direktivo (ES) št. 1272/2008.
Faroklasser/farokategorier
Enligt förordning (EC) nr 1272/2008 avseende klassificering, märkning
- och förpackning av substanser och blandningar ('CLP-förordningen')
- Ingen klassificering i enlighet med förordning (EG) nr 1272/2008.
Tehlike sınıfı / Tehlike kategorisi
Maddelerin karışımı hakkında 1272/2008 numaralı (AB) talimatnamesi (CLP
- Talimatnamesi) doğrultusunda sınıflandırılmış, ambalajlanmış,
- etiketlenmiş ve paketlenmiştir.
- 28848/2013 T.C. SEA’ya göre zararlı olarak sınıflandırılmamıştır.
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Barrel Temperatures - Front | - | °C | 260 - 270 | |
| Barrel Temperatures - Middle | - | °C | 250 - 260 | |
| Barrel Temperatures - Nozzle | - | °C | 260 - 270 | |
| Barrel Temperatures - Rear | - | °C | 230 - 240 | |
| Dry Air Drying Temperature | - | °C | 120 | |
| Dry Air Drying Time | - | h | 2 - 3 | |
| Hold Pressure (% of injection pressure) | - | % | 50 - 75 | |
| Melt temperatures | - | °C | 250 - 300 | |
| Moisture Content max. (%) | - | % | <= 0,02 | |
| Mold Temperatures | - | °C | 80 - 120 | |
| Peripheral Screw Speed | - | m/s | 0.05 - 0.2 | |
| Plastic Back Pressure (specific) | - | bar | 50 - 150 | |
| Shot-to-Cylinder Size | - | % | 30 - 70 | |
| Standard Melt temperature | - | °C | 270 | |
| Vent Depth | - | mm | 0.025 - 0.075 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Burning behavior UL 94 [UL recognition] | UL 94 | 2.9 mm | Class | HB (CL) |
| Burning behavior UL 94 [UL recognition] | UL 94 | 0.75 mm | Class | V-2 (CL) |
| Burning rate (US-FMVSS) | ISO 3795 | >=1.0 mm | mm/min | passed |
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.65 |
| Coefficient of linear thermal expansion, parallel | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.65 |
| Flash ignition temperature | ASTM D1929 | °C | 480 | |
| Glass transition temperature | ISO 11357-1,-2 | 10 °C/min | °C | 145 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 1.0 mm | °C | 850 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 1.5 mm | °C | 875 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 3.0 mm | °C | 930 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 0.75 mm | °C | 875 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 1.5 mm | °C | 875 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 3.0 mm | °C | 900 |
| Oxygen index | ISO 4589-2 | Method A | % | 28 |
| Relative temperature index (Electric strength) [UL recognition] | UL 746B | 1.5 mm | °C | 125 |
| Relative temperature index (Tensile impact strength) [UL recognition] | UL 746B | 1.5 mm | °C | 115 |
| Relative temperature index (Tensile strength) [UL recognition] | UL 746B | 1.5 mm | °C | 125 |
| Resistance to heat (ball pressure test) | IEC 60695-10-2 | °C | 136 | |
| Self ignition temperature | ASTM D1929 | °C | 550 | |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 138 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 125 |
| Thermal conductivity, through-plane | ISO 8302 | 23 °C; 50 % r. h. | W/(m*K) | 0.2 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 146 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 145 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Ball indentation hardness | ISO 2039-1 | N/mm² | 115 | |
| Charpy impact strength | ISO 179/1eU | -30 °C | kJ/m² | N |
| Charpy impact strength | ISO 179/1eU | -60 °C | kJ/m² | N |
| Charpy impact strength | ISO 179/1eU | 23 °C | kJ/m² | N |
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | -30 °C/ 3 mm | kJ/m² | 12C |
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | 23 °C/ 3 mm | kJ/m² | 60P(C) |
| Flexural modulus | ISO 178 | 2 mm/min | MPa | 2350 |
| Flexural strain at flexural strength | ISO 178 | 2 mm/min | % | 7.1 |
| Flexural strength | ISO 178 | 2 mm/min | MPa | 97 |
| Flexural stress at 3.5 % strain | ISO 178 | 2 mm/min | MPa | 73 |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 55P |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | -30 °C/ 3 mm | kJ/m² | 12C |
| Nominal strain at break | ISO 527-1,-2 | 50 mm/min | % | > 50 |
| Puncture energy | ISO 6603-2 | -30 °C | J | 60 |
| Puncture energy | ISO 6603-2 | 23 °C | J | 55 |
| Puncture impact properties - maximum force | ISO 6603-2 | -30 °C | N | 5900 |
| Puncture impact properties - maximum force | ISO 6603-2 | 23 °C | N | 4900 |
| Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | 125 |
| Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 60 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2350 |
| Yield strain | ISO 527-1,-2 | 50 mm/min | % | 6 |
| Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 63 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Haze for transparent materials | ISO 14782 | 3 mm | % | < 0.5 |
| Luminous transmittance (clear transparent materials) | ISO 13468-2 | 1 mm | % | 90 |
| Luminous transmittance (clear transparent materials) | ISO 13468-2 | 2 mm | % | 90 |
| Luminous transmittance (clear transparent materials) | ISO 13468-2 | 4 mm | % | > 89 |
| Luminous transmittance (clear transparent materials) | ISO 13468-2 | 3 mm | % | > 89 |
| Refractive index | ISO 489 | Procedure A | 1.584 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 34 |
| Molding shrinkage, normal | ISO 294-4 | 60x60x2 mm³/ 500 bar | % | 0.7 |
| Molding shrinkage, parallel | ISO 294-4 | 60x60x2 mm³/ 500 bar | % | 0.65 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Comparative tracking index CTI | IEC 60112 | Solution A | Rating | 250 |
| Comparative tracking index CTI M | IEC 60112 | Solution B | Rating | 125M |
| Dissipation factor | IEC 60250 | 1 MHz | 10^-4^ | 95 |
| Dissipation factor | IEC 60250 | 100 Hz | 10^-4^ | 5 |
| Electrical strength | IEC 60243-1 | 1 mm | kV/mm | 34 |
| Relative permittivity | IEC 60250 | 1 MHz | 3.0 | |
| Relative permittivity | IEC 60250 | 100 Hz | 3.1 | |
| Surface resistivity | IEC 62631-3-2 | Ohm | 1E16 | |
| Volume resistivity | IEC 62631-3-1 | Ohm*m | 1E14 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Injection velocity | ISO 294 | mm/s | 200 | |
| Injection molding - Melt temperature | ISO 294 | °C | 280 | |
| Injection molding - Mold temperature | ISO 294 | °C | 80 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Bulk density | ISO 60 | Pellets | kg/m³ | 660 |
| Density | ISO 1183-1 | kg/m³ | 1190 | |
| Water absorption (equilibrium value) | ISO 62 | 23 °C; 50 % r. h. | % | 0.12 |
| Water absorption (saturation value) | ISO 62 | Water at 23 °C | % | 0.3 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
-
Stress-Strain Makrolon® LED2245 (Multipoint Data Sheet) Spannung-Dehnung Makrolon® LED2245 (Multipoint Data Sheet)
-
Secant modulus - Strain Makrolon® LED2245 (Multipoint Data Sheet) Sekantenmodul-Dehnung Makrolon® LED2245 (Multipoint Data Sheet)
-
Viscosity Shear Rate Makrolon® LED2245 (Multipoint Data Sheet) Viskosität Schergeschwindigkeit Makrolon® LED2245 (Multipoint Data Sheet)
-
Specific Volume-Temperature (pvT) Makrolon® LED2245 (Multipoint Data Sheet) Spezifisches Volumen-Temperatur (pvT) Makrolon® LED2245 (Multipoint Data Sheet)
