Desmophen® 60WB01 FL- for flexible slabstock foams
Desmophen® 60WB01 FL is a partly branched polyester polyol based on adipic acid, diethylene glycol and trimethylol propane. It is particularly suitable for the production of flexible polyester polyurethane foams with reduced fogging tendency.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester polyol
Material
No data available
General Characterization
Desmophen® 60WB01 FL is a partly branched polyester polyol based on adipic acid, diethylene glycol and trimethylol propane. It is particularly suitable for the production of flexible polyester polyurethane foams with reduced fogging tendency.
Storage Conditions
Recommended storage temperature (°C): 20 - 35
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| TDI basic value | pbw Desmodur® T on 100 pbw Desmophen® VP.PU 60WB01 | 9.3 | |
| Appearance | PET-03-04 | colourless to pale liquid | |
| Density 20 °C | DIN 51757 | g/cm³ | 1.19 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acidity | DIN ISO 2114 | mg KOH/g | 0.6 - 1.4 |
| Colour value (Hazen) | DIN EN 1557 | ≤ 150 | |
| Water content | DIN 51777-1 | % by wt. | ≤ 0.05 |
| Hydroxyl number | DIN 53240-2 | mg KOH/g | 57 - 63 |
| Viscosity 25 °C | DIN ISO 3219 | mPa*s | 17,400 - 21,600 |
| Water content | DIN 51777-1 | % by wt. | ≤ 0.05 |
| Acidity | DIN ISO 2114 | mg KOH/g | 0.6 - 1.4 |
| Viscosity 25 °C | DIN ISO 3219 | mPa*s | 17,400 - 21,600 |
| Colour value (Hazen) | DIN EN 1557 | ≤ 150 | |
| Hydroxyl number | DIN 53240-2 | mg KOH/g | 57 - 63 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
