- Foams
Desmophen® 24WB03 - for flexible slabstock foams
A polyether polyol designed for the production of visco-elastic polyurethane foams. Desmophen 24WB03 is recommended to be processed with Desmodur® T 65. Hydroxyl Number ca. 165 mg KOH/g
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Foams
- Flexible, Slabstock, Viscoelastic
General Characterization
Desmophen® 24WB03 is a polyether polyol designed for the production of visco-elastic polyurethane foams. Desmophen 24WB03 is recommended to be processed with Desmodur® T 65.
Storage Conditions
Recommended storage temperature (°C): 10 - 35.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Appearance | PET-03-04 | colourless to pale liquid | |
| Density 25 °C | DIN 51757 | g/cm³ | approx. 1.05 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity 25 °C | PET-10-01 | mPa*s | 225 - 275 |
| Water content | PET-19-01 | % by wt. | ≤ 0.1 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 225 - 275 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 150 - 180 |
| Water content | PET-19-01 | % by wt. | ≤ 0.1 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 150 - 180 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
