Desmophen® 1388 71% EA
Desmophen 1388 71% EA is a fatty acid-modified, saturated polyester resin. It is suitable for use as a coreactant for Desmodur® L 75 and ultra L 75, IL and ultra IL, HL, and N 75A for the formulation of two-component polyurethane coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Desmophen 1388 71% EA is a fatty acid-modified, saturated polyester resin.
It is suitable for use as a coreactant for Desmodur® L 75 and ultra L 75, IL and ultra IL, HL, and N 75A for the formulation of two-component polyurethane coatings.
It is suitable for use as a coreactant for Desmodur® L 75 and ultra L 75, IL and ultra IL, HL, and N 75A for the formulation of two-component polyurethane coatings.
Storage Conditions
Desmophen 1388 71% EA should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. The product tends to become turbid. After adding solvent, the product becomes homogeneous and clear. It can then be used with no adverse effects on quality. Recommended storage temperature is a maximum of 30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Flash point | °C | approx. 1 | |
Density at 20^oC | g/ml | approx. 1.07 | |
Equivalent weight | approx. 360 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hydroxyl content | % | 4.7 ± 0.5 | |
Viscosity at 23^oC | mPa∙s | 950 ± 200 | |
Acid value | mg KOH/g | 12.5 ± 2.5 | |
Non-volatile content 2 g resin / 2 ml toluene1 h at 125^oC, convection oven | 71.0 ± 1.5 | ||
Iodine color value | ≤ 5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com