Desmophen® 1166 S N - for flexible slabstock foams
Desmophen® 1166 S N is an inactive trifunctional polyether modified a styrene-acrylonitrile (SAN) polymer. It is specifically designed for the production of conventional flexible slabstock foams with enhanced loadbearing properties, using CO2-technologies due to its appropiate particle size distribution. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and tertiary amine catalysts.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Desmophen® 1166 S N is an inactive trifunctional polyether modified a styrene-acrylonitrile (SAN) polymer. It is specifically designed for the production of conventional flexible slabstock foams with enhanced loadbearing properties, using CO2-technologies due to its appropiate particle size distribution. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and tertiary amine catalysts.
Storage Conditions
Recommended storage temperature (°C): 10 - 35
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period.
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Appearance | PET-03-04 | opaque white liquid | |
TDI basic value | pbw Desmodur® T on 100 pbw Demophen® 1166 S N | 5.7 | |
Density 20 °C | DIN 51757 | g/cm³ | 1.035 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Viscosity 25 °C | PET-10-01 | mPa*s | 1000 - 1700 |
Hydroxyl number | PET-11-01 | mg KOH/g | 34 - 39 |
Viscosity 25 °C | PET-10-01 | mPa*s | 1000 - 1700 |
Hydroxyl number | PET-11-01 | mg KOH/g | 34 - 39 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com