Desmophen® 1166 S N - for flexible slabstock foams
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Desmophen® 1166 S N is an inactive trifunctional polyether modified a styrene-acrylonitrile (SAN) polymer. It is specifically designed for the production of conventional flexible slabstock foams with enhanced loadbearing properties, using CO2-technologies due to its appropiate particle size distribution. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and tertiary amine catalysts.
Lagerungsbedingungen
Recommended storage temperature (°C): 10 - 35
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period.
The product must be stored in sealed, moisture-tight containers. Partially used
containers should be tightly resealed, due to the hygroscopic nature of the
product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the
product no longer meets specifications. However, prior to using said product,
Covestro recommends to test such a product if it still meets the specifications.
Covestro does not make any representation regarding the product after the
period and Covestro shall not be responsible or liable in any way for the product
failing to meet specifications after the period.
Probenahme
Moisture access must be prevented when taking product samples.
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Appearance | PET-03-04 | opaque white liquid | |
| Density 20 °C | DIN 51757 | g/cm³ | 1.035 |
| TDI basic value | pbw Desmodur® T on 100 pbw Demophen® 1166 S N | 5.7 |
Genannte Eigenschaften Spezifikation
| Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
|---|---|---|---|
| Hydroxyl number | PET-11-01 | mg KOH/g | 34 - 39 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 1000 - 1700 |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
| Viscosity 25 °C | PET-10-01 | mPa*s | 1000 - 1700 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 34 - 39 |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
