Desmomelt® U 320
Aliphatic high-molecular-weight polyester-polyurethane adhesive raw material. Desmomelt® U 320 is a solid raw material for the formulation of non-yellowing, thermally activated adhesives. Desmomelt® U 320 is particularly well suited for applications with low thermal activation temperatures as e.g. in automotive trim, textile, footwear and furniture applications. Desmomelt® U 320 can be used as a hotmelt applied as a filament, foil or powder, as well as a raw material for non-yellowing solvent-based contact and/or heat activated adhesives.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Desmomelt U 320 is an aliphatic high-molecular-weight polyester-polyurethane adhesive raw material. It is a solid raw material for the formulation of non-yellowing, thermally activated adhesives. Desmomelt U 320 is particularly well suited for applications with low thermal activation temperatures as e.g. in automotive trim, textile, footwear and furniture applications. Desmomelt U 320 can be used as a hotmelt applied as a filament, foil or powder, as well as a raw material for non-yellowing solvent-based contact and/or heat activated adhesives.
Storage Conditions
Recommended storage temperatures: Temperatures higher than 30 °C should be avoided. Temperatures above 45 °C will lead to caking. Protect from direct sunlight, heat, moisture and foreign material.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Minimum activation temperature | °C | 55 - 65 | |
| Hot tack life (Depends on application conditions) | min | 2 - 5 | |
| Heat resistance | °C | approx. 50 | |
| Recommended processing temperature for automated application | °C | 200 - 260 | |
| Minimum extrusion temperature | °C | 120 | |
| Density | g/cm^3 | approx. 1.2 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Solution viscosity 15 w% in butanone-2 (MEK) /water (16:1 w/w) at 23°, (30 rpm) | mPa∙s | approx. 100 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
