- Adhesives
Desmodur® RFE
Solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- Isocyanate
- Polyisocyanurate
- Reactive system
- TDI
- Aromatic polyisocyanate
- Crosslinkers
- Polyisocyanate
Material
- Adhesives
- Moisture resistant, Heat activated, Contact adhesive, Ultra-low monomer, Solventborne
General Characterization
Solution of tris(p-isocyanatophenyl) thiophosphate in ethyl acetate.
Desmodur® RFE is a crosslinker with very universal suitability for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials.
Desmodur® RFE is a crosslinker with very universal suitability for adhesives based on Desmocoll®, natural or synthetic rubber with special adhesion on rubber materials.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture , heat and foreign material.
General information: During transportation and storage at low temperatures, crystalline deposits may form. These redissolve at room temperature. The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous in-crease in pressure in the containers. Exposure to air and/or light intensifies discoloration but this has no effect on the processing properties in general.
- Recommended storage temperature: 10 - 30 °C.
-
General information: During transportation and storage at low temperatures, crystalline deposits may form. These redissolve at room temperature. The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous in-crease in pressure in the containers. Exposure to air and/or light intensifies discoloration but this has no effect on the processing properties in general.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 20 °C | DIN 53 015 | mPa*s | approx. 3 |
| Non-volatile content | DIN EN ISO 3251 | % | approx. 27 |
| Flash point | DIN 51 755 | °C | - 4 |
| Solvent | Ethyl acetate | ||
| Density at 20 °C | DIN 53 217/5 | g/cm3 | approx. 1.0 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 7.2 ± 0.2 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
