Baypreg® F 310

two-component polyurethane system; very high flexural stiffness and excellent thermal properties; flexural strength 7 MPa @ 22°C

Contact an Expert
Market Switch
Selection will influence the results you get.
Copied to clipboard


Product Types

  • System


No data available

General Characterization

Baypreg F 310 system is a two component polyurethane system used in compression molding.

Storage Conditions

The isocyanate, Component A, is based on diphenylmethane diisocyanate (PMDI). It should be stored in tightly closed containers and protected from moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form ureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Recommended storage temperatures are 10° and 30°C (50° and 86°F).
The polyol blend, Component B, is hygroscopic and should be protected from atmospheric moisture by sealing the container, or blanketing the product with a dry atmosphere. Contamination with foreign materials, which can adversely affect processing, should be avoided. Materials should be stored at normal room temperature (18° to 30°C). Component B is not phase stable and needs mixed thoroughly befoe and during use.


No data available

Packaging Type

No data available


Technical Data Sheet
Safety Data Sheet
No direct download available, please visit